Panel Operation As - Panasonic NR-CY54AG Service Manual

12.2 Panel Operation AS.

Fig. 1
Fig. 4
- Take off Cover sheet at right PC Door by use cutter or small screwdriver as Fig.1
- Take off screw at hold Panel Operation As. With PC Door by use screwdriver as Fig.2
- Push Panel Operation As. up (~10mm) by use thumb push at bottom side as Fig.3
- After push up for Hooks loose from locked hole as Fig.4
- Push Panel Operation As. move to left side (~5mm) and push it up (~30mm) will loose from PC Door as Fig.5
Fig. 6
- Take off Lead Wire Socket which connect at Panel Operation As.as Fig.6
- Take off screw for hold PAS Operation PCB with Panel Operation As. by screwdriver as Fig.7
- Use left finger pull out at hook for lift up PAS Operation PCB loose out as Fig.8
- After change new PAS Operation PCB, have to re-ass'y it turn back to same take off
Fig. 2
Fig. 5
Fig. 7
- 20 -
Fig. 3
Fig. 8