Table of Contents
Advertisement
Parameter Name
AP Name
Enable AP
Partnered APC
Channel
Supported Clients
SSID
IP Address
WEP Encryption
WEP Key Size
WEP Key(s)
Supported Rates
RTS/CTS
A. Parameters
Range
1-63 characters
Enabled, Disabled
-
1-11; 1, 6, and 11 are
independent
11 Mbps clients only,
Allow 2 Mbps clients
1-32 characters
Use DHCP, Specify IP
Off, Authentication, All
Traffic
40 bit, 128 bit
10 hexadecimal digits
for 40 bit encryption,
20 hexadecimal digits
for 128 bit encryption
Any combination of
11 Mbps, 5.5 Mbps,
2 Mbps, 1 Mbps
Always on, Always off,
Based on packet size
30
Default
unit's physical address
Enabled
Any
Assigned by AP
Controller
Allow 2 Mbps clients
proxim
Use DHCP
Off
40 bit
Blank
All rates supported
Always off
Advertisement
Table of Contents
