Using the expression pedal
If an effect in the PEDAL category is selected when using a
effect with the expression pedal.
Setting pedal effects
1.
In EDIT mode, select an effect from the PEDAL category.
NOTE
Only one effect in a patch can be selected from the PEDAL category.
HINT
Selecting effects from categories (
2.
Turn
–
Adjust the pedal effect. (
3.
Use the expression pedal.
This changes the amount of the effect.
HINT
Press the front-end of the expression pedal down to turn the pedal effect ON/OFF . This does not, howev-
er, save the ON/OFF setting.
"Selecting effect categories" on page
.
"Adjusting effect parameters" on page
(G1X FOUR
, you can control the amount of the
21)
53
only)
20)