Setting The Bank Hold Function - Zoom G1 Four Operation Manual

Setting the BANK HOLD function

This function can be used to limit to the same bank when switching patches.
1.
Press .
This opens the SETTING screen.
2.
Press .
This opens the SETUP screen.
3.
Turn .
When BANK HOLD is ON
Switching down from the lowest patch in a bank will open the highest patch in the same bank.
Switching up from the highest patch in a bank will open the lowest patch in the same bank.
Example: current patch in Bank 1
When BANK HOLD is OFF
Switching down from the lowest patch in a bank and up from the highest patch in a bank will open a
patch in the next bank.
Example: current patch in Bank 1
34