Using The Expression Pedal (Fp01/Fp02) - Zoom A2 Operation Manual

Using an Optional Foot Switch or Pedal
will activate hold, causing the current delay
sound to be repeated (see illustration below).
Pressing the foot switch once more cancels the
hold condition, and the delay sound will decay
normally.
●
dM (delay input mute)
The foot switch controls input mute on/off for
the DELAY module.
●
Mn (manual mode)
The foot switch toggles between play mode and
manual mode. This has the same effect as
pressing the [MANUAL] key.
●
Fb (feedback control)
The foot switch toggles the feedback control
function between on and off. This has the same
effect as pressing the [Q] foot switch in
manual mode. For details on the feedback
control function, see page 18.
HINT
• For information on effect parameters supporting the
tap function, see pages 27 – 34.
• To use the hold function, an effect type that
supports the hold function must be selected in the
patch. For details, see pages 27 – 34.
• While the DELAY/REVERB module is set to hold or
mute, the dot in the center of the display flashes.
4.
Use the foot switch in play mode or
manual mode.
The switch operates according to the selected
setting. This setting applies to all patches, and the
most recent value is always active. There is no
need to store the setting.
22
Using the expression pedal
(FP01/FP02)
Connecting an expression pedal (FP01/FP02) to
the [CONTROL IN] jack allows using it as a
volume pedal or as a real-time controller for
effect parameters. The function assignment for
the expression pedal can be saved for each patch
individually.
For information on parameters that can be
adjusted with the expression pedal, refer to pages
27 – 34.
1.
Plug the cable from the expression
pedal into the [CONTROL IN] jack,
and then turn the A2 on.
2.
Select the patch for which you want
to use the expression pedal.
3.
Set the Module selector to the
"CONTROL" position.
The A2 goes into edit mode.
4.
Turn parameter knob 1 to select one
of the following modulation targets
for the expression pedal.
●
oF
Pedal is inactive.
●
vL
Volume
●
CU, Cd, CH, CL
COMP/LIMIT module
ZOOM A2