Advertisement
Quick Links
Note: These installation instructions cover standard product only. To install options, such as
shim kits or interlock brackets, refer to the instructions packed with the optional component.
Packed for reinforced metal doors.
Optional sex nuts required for unreinforced metal and composite wood doors and are
furnished standard with all fire-rated (A) devices.
Outside Trim: Device is packed ready for any applicable Corbin Russwin Trim.
TM
SecureBolt
(3) #10-24 PFHMS
WARNING
This product can expose
you to lead which is
known to the state of
California to cause cancer
and birth defects or other
reproductive harm. For
more information go to
www.P65warnings.ca.gov.
08/2018
ED4200, ED4200M, ED4200MA
ED4200S, ED4200SM, ED4200SMA
Series Rim & SecureBolt Exit Devices
Installation Instructions FM 316 10/18
(Single Doors or Pairs with Mullion)
Rim Device Shown
1
®
Not a feature of Fire Rated Devices
Advertisement
Related Manuals for Corbin Russwin Rim & SecureBolt ED4200 series
Summary of Contents for Corbin Russwin Rim & SecureBolt ED4200 series
- Page 1 Packed for reinforced metal doors. Optional sex nuts required for unreinforced metal and composite wood doors and are furnished standard with all fire-rated (A) devices. Outside Trim: Device is packed ready for any applicable Corbin Russwin Trim. Rim Device Shown SecureBolt...
-
Page 2: General Information
General Information ED 4200, ED4200S For Narrow Stile Metal Doors of Either Hand ED 4200M, ED4200MA, ED4200S, ED 4200SMA For Metal, Composite and Wood Doors of Either Hand Shim Kit Option 697F35-8, Black Finish Kit consists of (2) Latch Head Shims Maintenance (Device Cover seats on shim) and (2) End Cap Shims (End Cap Shims (End... - Page 3 ED4200 & ED4200S Minimum Door Stile 2” (50mm) ED4200M, ED4200MA, ED4200SM & ED4200SMA Minimum Door Stile 3 1/2” (89mm) Door and Frame must meet structural and dimensional specifications on exit device template(s) for door and frame preparation.
- Page 4 A = 1 1/4” (32mm) ED4200, ED4200S with 808 Mullions B = 3/4” (29mm) ED4200M, ED4200MA, ED4200SM, ED4200SMA with 700 & 900 Mullions with 650F308 strikes...
- Page 5 ED4200M, ED4200MA ED4200SM, ED4200SMA Caution: The Use of Shims (i.e. Raised Glass) requires shifting location of strike ED4200, ED4200S away from the door. (See Door Marker Template for details).
- Page 6 Soffit to Cutoff For ED4200 & ED4200S...
- Page 7 One shim Kit 697F35-8 required for each 1/4” (6mm) of device lift needed. Each Shim kit includes 2 1/8” (3mm) thick shims. Longer device mounting screws needed when more than (2) shim kits are used. See Shim Kits Option on page 2.
- Page 8 ED4200, ED4200S...
- Page 9 ED4200M, ED4200MA, ED4200SM, ES4200SMA (3) #10-24 PFHMS Use 8-32 PFHMS screws (2) for Cover and (3) for End Cap.
- Page 10 Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. Note: Marketing will continue to be part of the instruction sheet and template reviewing process...
- Page 11 Copyright © 2008 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. Note: Marketing will continue to be part of the instruction sheet and template reviewing process...
- Page 12 * A 2 line Version and a 5 Line Version Of The Corporate Statement Image Are Available Copyright © 2008-2010 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc.
Need help?
Do you have a question about the Rim & SecureBolt ED4200 series and is the answer not in the manual?
Questions and answers