Pepperl+Fuchs VisuNet GMP DM200 Series Hardware Manual page 25

VisuNet GMP DM
Operation
Navigating in the OSD menu
1. If applicable select the OSD menu.
2. Navigate to the designated tab with the
(scroll to the left) respectively.
The active tab will be marked.
3. To select a tab, press the
The sub menu will be opened.
4. Navigate to the designated sub menu entry with the
respectively
5. To select a sub menu, press the
Depending on the menu you will get to another sub menu or to a dialog box.
Adjusting values
1. To adjust values (e.g. brightness or contrast) in a sub menu, press the
–
button respectively.
2. After adjusting the value, quit the active dialog box by pressing the
The adjusted value will be adopted and you will return to the designated sub menu.
Quitting OSD menu/sub menus
To quit a sub menu, select the menu item Back or press the
The sub menu will be quit.
Note!
Image Sticking
Displaying a fixed pattern may cause burn-in-effects (image sticking due to the LCD
characteristics).
To avoid image sticking, change pattern frequently or activate screen saver.
Please note that display damage caused by burn-in effects is not included in the
warranty.
+
button (scroll to the right) and
Select
button.
Select
button.
–
+ –
button and the button
+
button and the
Menu
button.
Menu
button.
button
25