Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PolyScience 400 Series
Summary of Contents for PolyScience 400 Series
-
Page 1: Quick Start Guide
400 Series Chamber Vacuum Sealer Quick Start Guide... - Page 2 For 120V models supply 120V/20A circuit. All others consult an electrician. Caution: Do not use extension cords or surge protectors. Do not share the line with motors or compressors. Power Switches & Resets 400 Series (back) Main Power Switch - 2 -...
- Page 3 Setting Up Adding Oil Caution: Add oil before starting machine. Mind the oil fi ll line, see label instructions on machine. 400 Series Use 2.5mm hex wrench supplied and remove cover, location may vary. Use wrench supplied to remove top oil plug and add oil, location may vary.
- Page 4 Powering Up Date & Time Home Screen When powering up the machine for the fi rst time, please check the date & time. If it needs to be changed, navigate to the Date & Time settings: Home > Settings > Date & Time Once you have set the date/time, touch the green check mark and the machine will restart.
- Page 5 Powering Up Users & Passcodes To set up users on the machien go to Home > Settings > Users and touch the Add User button Once you are done adding users, you have to activate the PIN prompt - go to Home >...
-
Page 6: Getting Started
Getting Started Presets Your 400 Series machine comes with 6 most commonly used Presets to get you started. The preset buttons are listed on the Home screen. Below is a description of their vacuum settings and how they are being used. - Page 7 Getting Started Product Groups/Logs Grouping food products organizes and speeds up the product look up process (PLU) as well as aids in HACCP planning. Select up to 6 groups that best defi ne the food products you plan to place under vacuum.
- Page 8 Getting Started Save New Product To add a new product you must be logged in as a Manager user. Go to Home > Products and touch the Add Product button in the top right corner of the screen. Choose a Product Number (up to 5 digits long).
-
Page 9: Food Safety
Getting Started Edit/Delete a Product Log in as a Manager user, go to Home > Products and touch Edit button - it will turn green color. Now touch the product name you want to edit/delete. To delete, touch the Delete button in the top left corner. - Page 10 Freestyle Mode (when touching the Refresh button), go to Home > Settings > General and change the seal time under Default Seal. Restart the machine to take effect. We recommend seconds for the 400 Series. - 10 -...
- Page 11 HACCP plan for Reduced Oxygen Packaging (ROP) and Sous Vide Cooking. To get started with your HACCP plan, visit the website below. HACCP Portal is included with your 400 Series and your machine’s serial number is your free ticket: www.haccp-portal.com/400series...
-
Page 12: Temperature Probe
Accessories Temperature Probe Sous Vide Probe, K-Type (3”, dull tip) #ST200045 Product Probe, K-Type (4”, sharp tip) #ST200040 Label Printer Direct Thermal 2x3” Labels - Case Label Printer (425 labels/roll, 12 rolls/case) (USB) #ST200060 #ST200009 Keyboard Water-Resistant Silicone Keyboard (USB) #ST200012 Inkjet Report Printer Canon Pixma MG2550... -
Page 13: Important Product Information
Important Product Information One-Year Limited Warranty *This warranty ONLY applies to the Original authorized distributors/dealers), which are incon- Purchaser and Owner of the new equipment and sistent with the terms herein shall not constitute a ONLY applies to manufacturer’s defects. term of the minipack-torre and minipack america, This warranty will ONLY be honored if minipack inc express warranty, and shall not be binding to...
Need help?
Do you have a question about the 400 Series and is the answer not in the manual?
Questions and answers