Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Quick Start Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PolyScience 400 Series
Summary of Contents for PolyScience 400 Series
- Page 1 400 Series Chamber Vacuum Sealer Quick Start Guide...
-
Page 2: Machine Placement
For 120V models supply 120V/20A circuit. All others consult an electrician. Caution: Do not use extension cords or surge protectors. Do not share the line with motors or compressors. Power Switches & Resets 400 Series (back) Main Power Switch - 2 -... - Page 3 Adding Oil Caution: Add oil before starting machine. Mind the oil fi ll line, see label instructions on machine. 400 Series Use 2.5mm hex wrench supplied and remove cover, location may vary. Use wrench supplied to remove top oil plug and add oil, location may vary.
- Page 4 Powering Up Date & Time When powering up the machine for the fi rst time, please check the date & time. If it needs to be changed, navigate to the Date & Time settings: Home > Settings > Date & Time Once you have set the date/time, touch the green check mark and the machine will restart.
-
Page 6: Getting Started
Getting Started PRESETS Group Your SmarTouch™ machine is pre-set with 6 most commonly used products and techniques to get you started. Go to Home, touch the group PRESETS, and then touch the Product Name. Below is an explanation of their vacuum settings and how they are used. 00600 - SAVE FOOD (POUCH) This is the most simple, yet most common program. - Page 7 Save New Product To add a new product you must be logged in as a Manager user. Go to Home > Products and touch the Add Product button in the top right corner of the screen. Choose a Product Number (up to 5 digits long).
-
Page 8: Food Safety
Food Safety Food Safety Log (Questions) You can set specifi c food safety log questions for each of the 6 groups. Go to Home > Logs and touch the log you want to manage the questions for. A log cosists of 3 categories: BQs = Before Questions - asked before packaging AQs = After Questions... - Page 9 Edit/Delete an User Log in as a Manager user, go to Home > Settings > Users and touch the user name you want to edit/delete. To delete, touch the Delete button in the top left corner. To edit, toggle through the screens by touching the Next button Freestyle Mode...
- Page 10 HACCP Portal Registration HACCP Portal provides you with an easy way to create a thorough HACCP plan for Reduced Oxygen Packaging (ROP) and Sous Vide Cooking. To get started with your HACCP plan, visit the website below. HACCP Portal is included with your SmarTouch™...
- Page 11 Accessories Temperature Probe Sous Vide Probe, K-Type (3”, dull tip) #ST200045 Product Probe, K-Type (4”, sharp tip) #ST200040 Label Printer Direct Thermal 2x3” Labels - Case Label Printer (425 labels/roll, 12 rolls/case) (USB) #ST200060 #ST200009 Keyboard Water-Resistant Silicone Keyboard (USB) #ST200012 Inkjet Report Printer Canon Pixma MG2550...
-
Page 12: Important Product Information
Important Product Information One-Year Limited Warranty *This warranty ONLY applies to the Original authorized distributors/dealers), which are incon- Purchaser and Owner of the new equipment and sistent with the terms herein shall not constitute a ONLY applies to manufacturer’s defects. term of the minipack-torre and minipack america, This warranty will ONLY be honored if minipack inc express warranty, and shall not be binding to...
Need help?
Do you have a question about the 400 Series and is the answer not in the manual?
Questions and answers