Recommended Tool Kit; Tools; Sundries - DigiCore Technology Ctrack iS100 Series II Installation Manual

3. RECOMMENDED TOOL KIT

All Tools and Test equipment listed below are catered for Light and Heavy vehicles.
3.1.

TOOLS

Screw Drivers – All sizes
Spanners and socket set. 6mm -> 27mm
Splined (Torx) drivers – Size T8 to T40
Hex Drivers (Allen Keys) – 2, 3, 4,5,6,7, & 8mm.
Pliers – Long & Flat Nose
Side cutters – Heavy and light duty
Lug Tools
Soldering Iron – Gas or Electrical
Drill – Electric or Battery Operated
Drill Bits – sizes 2.5mm – 14.5mm
50 to 100 Meter Tape Measure (For Speed Calibration)
Heat Gun
Hammer and Punch
Hacksaw and Blades
Panel fork
"Stanley" knife
Lead Light
3.2.

SUNDRIES

Corrugated sleeving all sizes
Heat Shrink 302mm and 9.5mm
6mm-8mm sleeving
Cloth tape 5mm-25mm
Black Insulation tape – Good quality
Revision: 02 05 December 2012
DigiCore Technology (Pty) Ltd
P.O. Box 68270, Highveld Park 0169, South Africa
Ctrack iS100 Series II Installation Manual
COMPANY CONFIDENTIAL
© DigiCore Technology (Pty) Ltd
Manual
DCT-MAN-228
Page 9 of 26