Led Description; Led 1 - Bluetooth; Led 2 - System - DigiCore Technology Ctrack iS100 Series II Installation Manual

4.6.

LED DESCRIPTION

There are 4 LEDs on the Ctrack iS100 Series II which can be used for determining the state of the
unit. Their functions are as follows:
4.6.1.

LED 1 - Bluetooth

Red
State Description
TBA
TBA
TBA
4.6.2.

LED 2 - System

Green
State Description
Off No attention Required
On Busy Initialising the GSM and Sim
Flash Attention! Intervention is required as the unit either has no MIT, or has a mismatched
mit, using the install tool the technician must select New or Unit/Sim Swap. The unit will
not communicate or Report until this action has taken place.
Off No attention Required
Revision: 02 05 December 2012
DigiCore Technology (Pty) Ltd
P.O. Box 68270, Highveld Park 0169, South Africa
Ctrack iS100 Series II Installation Manual
Led No Colour Function
Led 1
Led 2
Led 3
Led 4
Led 5
COMPANY CONFIDENTIAL
© DigiCore Technology (Pty) Ltd
Bluetooth
Red Power On
Green Orientation
Green GPS
Red GSM LED
Manual
DCT-MAN-228
Page 14 of 26