Maintenance; Lubrication; General Information; Recommended Lubricants - Hardi ZATURN Instruction Book

Lubrication

General information

Keep all lubricants clean and stored in a cool, dry place to avoid
contamination from dirt and condensed water. Keep all oil filling jugs,
funnels and grease guns clean and clean the lubricating points once
lubricated. Avoid skin contact with mineral oil products for long periods.
Always follow the guidelines on the recommended amounts. If the
recommended amount is not given, lubricate until traces are visible. The
pictograms on lubrication are as follows:
1. Lubricants to be used (See 'Recommended lubricants').
2. Operating hours before next lubrication.
μ
ATTENTION! If the sprayer is cleaned with a high-pressure water cleaner, the whole machine should be lubricated.

Recommended lubricants

BALL BEARINGS:
Universal Lithium grease, NLGI No. 2 2
SHELL RETINAX EP2
CASTROL LMX grease
OIL LUBRICATION:
TOTAL Transmission TM
SAE 80W/90
Castrol EPX 80W/90
SHELL Spirax 80W/90
Mobil Mobilube 80W/90

Lubricating and greasing the mistblower

6 - Maintenance

SLIDE BEARINGS:
Lithium grease enhanced with molybdenum or grafite disulphate
SHELL RETINAX HDM2
CASTROL MOLYMAX
OIL LUBRICATION:
SAE 30W
SAE 20W/50
49