Regular Maintenance; Every 10 Working Hours - Suction Filter; Every 10 Hours Of Operation - Pressure Filters - Hardi ZATURN Instruction Book

6 - Maintenance

Regular maintenance

Every 10 working hours – Suction filter
To service the suction filter, proceed as follows:
1. Undo the nut (A) and open up the filter.
2. Remove the filter (B) from its housing.
3. Replace the O-rings (C) if necessary.
To put it back together:
4. Grease the O-rings.
5. Fit the filter inside its housing.
6. Grease the O-rings inside the cover of the filter
7. Put the cover back on and tighten it.
Every 10 hours of operation – Pressure filters
o remove the pressure filter, unscrew the filter housing to inspect and
clean the filter. When you reassemble the filter, grease the o-ring.
There are different mesh sizes. See the section 'Technical specifications
– Filters and nozzles' .
54