Table of Contents
Advertisement
Aspirator
The Aspirator is basically a "Y" tube. When water
portion of the aspirator, it creates a suction. This
suction then draws the detergent from the bulk
tank.
Aspirator Removal
1. Remove the dispenser box from the top cover.
2. Slide the aspirator mounting bracket out from
the dispenser.
3. Unclip the dispensing tube from the mounting
bracket.
4. Separate the dispensing tube from the
aspirator.
NOTE: If the rubber tube is being replaced, the
clamps that secure it to the aspirator will need
to be replaced. Use the small Click Clamps in kit
number WH49X20000 and Click Clamp pliers
WX05X10025.
– 47 –
Hide quick links:
Advertisement
Table of Contents
