Advertisement
User Manual of DM‐5R Two‐way Radio
15
SFT-D
16
OFFSET
17
MEMCH
18
DELCH
19
WT-LED
20
RX-LED
21
TX-LED
22
BAND
23
PONMGS
24
ROGER
25
RESET
26
MODE
27
MSG
28
Contact
29
CC
30
ENC-KEY
31
BS-SLOT
32
CP Ver.
Note: MSG，CP Ver. doesn't support modification; ANI-ID needs to be modified via frequency writing software.
OFF
Frequency
+
difference direction
-
Frequency
00.000,...,69.990
difference
Channel storage
000,...,127
Channel deletion
000,...,127
OFF
BLUE
Standby
backlight
selection
ORANGE
PURPLE
OFF
BLUE
Receiving backlight
selection
ORANGE
PURPLE
OFF
BLUE
Transmitting
ORANGE
backlight selection
PURPLE
VHF
Frequency
band
selection
UHF
FULL
Startup display
MGS
ON
Call
end
prompt
tone
OFF
VFO
Initialization
ALL
FM
Operation mode
DMR
INBOX
Message
OUTBOX
Digital contacts
Contact name
Color code
0,1,...,15
Encryption key
Key name
SLOT1
Time slot
SLOT2
Software version
XXXXXX
In frequency mode, there isn't difference
between
transmitting
frequency
receiving frequency.
In
frequency
mode,
the transmitting
frequency is the receiving frequency plus
the frequency difference.
In
frequency
mode,
the transmitting
frequency is the receiving frequency minus
the frequency difference.
Difference between transmitting frequency
and receiving frequency in frequency mode
(controlled
by
frequency
direction)
For channel storage, it is used to indicate
the number of the channel to be stored. If
CH-character is displayed in front of the
numbers, the channel has previously stored
channel parameters.
Delete the channel parameters of specified
channel. If there isn't CH-character in front
of the numbers, the channel doesn't have
parameters, and the operation is invalid.
Turn off the backlight
In standby mode, turn on the blue light.
In standby mode, turn on the orange light.
In standby mode, turn on the purple light.
Turn off the backlight
In receiving mode, turn on the blue light.
In receiving mode, turn on the orange light.
In receiving mode, turn on the purple light.
Turn off the backlight
In transmitting mode, turn on the blue light.
In transmitting mode, turn on the orange
light.
In transmitting mode, turn on the purple
light.
Set the working frequency band as
136~174MHz
Set the working frequency band as
400~480MHz
Full-screen character display
Type and model display
Activate call end prompt tone
Deactivate call end prompt tone
Menu initialization
Menu and channel initialization
Inquire the operation mode in channel
mode and modify the operation mode in
VFO mode
Inquire the operation mode in channel
mode and modify the operation mode in
VFO mode
Inbox (not available temporarily)
Outbox (not available temporarily)
Set via frequency writing software
Set color code value in digital mode
Set via frequency writing software
Time slot 1
Time slot 2
Inquire software version number (date)
and
difference
Advertisement
