Advertisement
User Manual of DM‐5R Two‐way Radio
you to use the function. Setting steps are as follows:
First, use the frequency writing software to establish new contact in digital contacts, select call type--voice all call, and set the call ID
as 16777215.
As shown in the figure below:
Then, add channel contacts in channel or A\B channel as shown below:
Do the frequency writing at last
Make full call:
After execution of transmitting by pressing [PTT] key, you can make call to all two-way radios in the same
frequency.
4. Contacts setting in digital mode:
All contacts shall be established and written via frequency writing software, then current channel contact can be selected via Menu
31, i.e., select the ID to be called by pressing [PTT].
5. Voice encryption in digital mode
Set key value in encryption options of DMR service via frequency writing software (note that the key shall comprise several different
characters, otherwise poor encryption effect may caused) as shown below:
Advertisement
