Sherwood Newcastle R-865 Operating Instructions Manual page 52

When selecting the VIRTUAL SPEAKER SETUP
Press the CURSOR UP( )/DOWN( ) buttons to select the VIRTUAL SPEAKER SETUP, then press
1
the ENTER button.
Press the CURSOR LEFT( )/RIGHT( ) buttons to select the DOLBY VS(Virtual Speaker) mode as
2
desired.
Press the CURSOR UP( )/DOWN( )
3
buttons to select the SPEAKER LAYOUT
mode.
V I R T U A L S P E A K E R S E T U P
D O L B Y
S P E A K E R L A Y O U T :
M O D E :
R E T U R N : B a c k
• Each time these buttons are pressed, the Dolby
Virtual Speaker mode changes as follows :
On : Select this to activate the Dolby Virtual Speaker
function.
Off : Select this to cancel it.
Press the CURSOR LEFT( )/RIGHT( )
4
buttons to select the desired mode.
• You can select the desired one of four speaker
layouts for actual speakers to be used .
• Each time these buttons are pressed , the speaker
layout mode changes as follows :
2- SPEAKER : Select this when using 2 front
speakers.
3- SPEAKER : Select this when using 2 front and
center speakers.
4- SPEAKER : Select this when using 2 front and
2 surround speakers.
5- SPEAKER : Select this when using 2 front, center
and 2 surround speakers.
Note :
• When the speakers are set to "None", the corresponding
speaker layout modes cannot be selected.
52
V S : Off
2 - SP E A K E R
W I DE
, : S e l e c t