Sherwood Newcastle R-865 Operating Instructions Manual page 51

When selecting the SPEAKER DISTANCE
Press the CURSOR UP( )/DOWN( ) buttons to select the SPEAKER DISTANCE, then press the
1
ENTER button.
Press the CURSOR UP( )/DOWN( )
2
buttons to select the unit.
• Then " " and " " are moved to the unit mode.
Press the CURSOR UP( )/DOWN( )
4
buttons to select the desired speaker.
• Then " " and " " are moved to its distance.
• You cannot select the subwoofer and the speakers
set to "None".
Repeat the above steps
6
• Each time these buttons are pressed, "Meters" or
"Feet" is selected.
• Once a unit is selected, the distances are
automatically changed in the selected unit.
5
• You can set the distance within the range of 0.3~9
meters in 0.3 meter intervals(or 1~30 feet in 1 feet
intervals)
and until the distances are all entered.
51
S P E A K E R D I S T A N C E
U N I T : Feet
F L : 1 0 R : 1 0
F C : 1 0
S U R R . ( A ) L : 1 0
S U R R . ( A ) R : 1 0
S U R R . ( B ) L : 1 0
S U R R . ( B ) R : 1 0
B L : 1 0 R : 1 0
R E T U R N : B a c k , : S e l e c t
Press the CURSOR LEFT( )/RIGHT( )
3
buttons to select the desired unit.
Press the CURSOR LEFT( )/RIGHT( )
buttons to enter the distance from the
selected speaker to the listening position.