Specifications - Sherwood NetBoxx R-904N Operating Instructions Manual

Specifications
mAIVIPLIFIER SECTION
. Power output, stereo mode, 6O, THDO.5%,1kHz I 2x lOOW
. Total harmonic distortion at -3 dB, 6 _, 1 kHz I 0.5%
. Input sensitivity/impedance
Line (CD, AUX, VIDEO) I 200 mV/47kO
. Signal to noise ratio, IHF "A" weighted
Line (CD, AUX, VIDEO) I 100 dB
* Frequency response
Line (CD, AUX, VIDEO), 20 Hz ~ 70 kHz I +0, -3 dB
* Bass/Treble control, 100 Hz/lO kHz I _+10dB
* Surround mode, only channel driven
Front power output, 6O, 1kHz, THDO.7% I lOOW/lOOW
Center power output, 6 _, 1 kHz, THD 0.7 % I 100 W
Surround power output, 6O, 1kHz, THDO.7% I lOOW/lOOW
Surround back / ROOM2 power output, 6 Q, 1 kHz, THD 0.7 %
I IOOW/IOOW
[]DIGITAL AUDIO SECTION
. Sampling frequency I 32, 44.1, 48, 96, 192 kHz
. Digital input level
Coaxial, 75 _ I 0.5 Vp-p
Optical, 660 nm I =15 ~ =21 dBm
[]VIDEO SECTION
= Video format I NTSC
. Input sensitivity(=Output level), 75
Video (Composite(normal)) I
Component video (R-Y signal)
(B-Y signal)
(Y signal)
. HDMI connector I 19 pin
1 Vp-p
I 0.5 Vp-p
I 0.5 Vp-p
I 1.0 Vp=p
[] FM TUNER SECTION
. Tuning frequency range I 87.5~107.9 MHz
. Usable sensitivity, THD 3%, S/N 30 dB I 9 dBf
.50 dB quieting sensitivity, mono/stereo I 20.2 / 45.3 dBf
. Signal to noise ratio, 65 dBf, mono/stereo I 70 / 65 dB
. Total harmonic distortion, 65 dBf,1 kHz, mono/stereo I 0.8 / 1.0 %
. Frequency response, 30 Hz~15 kHz I _+3dB
. Stereo separation, 1 kHz I 30 dB
. IF rejection ratio I 70 dB
[]GENERAL
. Power supply I 120 V ~ 60 Hz
. Power consumption I 120 W
* Dimensions (Wx Hx D, including protruding parts)
. Weight (Net) I 4.58 kg (10.1 Ibs)
I 430 × 72 × 306 ram(17 × 2-7/8 × 12 inches)
Note: Design and specifications are subject to change without notice for improvements.