Sherwood NetBoxx R-904N Operating Instructions Manual page 10

• I R-,904N(A)_ENG_09100T:R-,904N(A) 200,9-10-14 _-_ 1:53 _'_/_,_
/!
,I
8, CONNECTING FOR SYSTEM CONTROL
o Connect this jack to the DIGILINK-i jack of Sherwood
iPod dock that allows you to control the iPod with the
unit's remote control.
Sherwood iPod dock
/
9, CONNECTING TO NETWORK
Internet Modem Broadband router PC
IlWireless Connection
* Connect the supplied VuNow USB Wireless adapter to the USB connector and install a broadband router supporting
wireless LAN.
* The USB memory device can be also connected to the USB connector to play video or music files, etc. or to download the
rented videos. (For details on connecting USB memory device, refer to "USB CONNECTOR" on page 12.)
us@
Lo
Internet Modem Broadband router PC _
Supporting wireless LAN
II Notes :
• Be sure to make either wired connection or wireless connection. (You don't need to do both.)
• After making a broadband intemet connection, you should set the communication setting. (For details, refer to "Network" on page 42.)
• When using a broadband intemet connection, a contract with an internet service provider is required. For more information, contact your
nearest internet service provider.
• Refer to the operating instructions of the equipment because the connected equipment and connection method may differ depending on your
intemet environment.
• Use a LAN cable/router supporting 10 BASE-T/100 BASE-TX.
• A broadband speed of 768 kbps or more is recommended.
• Some LAN cables are easily affected by noise.
We recommend using a shielded type cable.
10, AC INPUT CORD
o Plug this cord into a wall AC outlet.