Sherwood NetBoxx R-904N Operating Instructions Manual page 43

_ _ _ J_l o _/€_
• I R-904_(A) E_O 09Z007:R-904_(A) 2009-Z0-Z4
o$
Z:53 ..... :I,>,_
. The table below describes the options available on the
"Settings" screen.
Option
Name Option Type Description
Network Wired, According to your home network
Wireless connection, choose it.
Choosing Auto would enable
IP Settings Auto, Static DHCP service, or you can set it to
static. By default, the Auto is set.
Following fields have to be set manually if the IP Settings is
set to static.
The IP address of the VuNow
IP Address IP address
Pod.
Subnet Mask Subnet mask Subnet mask of your network.
Gateway Gateway IP IP address of the gateway.
address
DNS server IP
DNS IP address of the DNS server.
address
Cancel To exit Network.
Save To confirm the settings.
4. Set the "Network" to "Wired".
5. Set each setting and select "Save" on the
"Settings" screen.
AdvancedWireless Mode
1, Perform the steps 1-3 in "Advanced Wired
Mode" procedure on the previous page.
2, Set the "Network" to "Wireless".
3, Set each setting and select "Next" on the
"Settings" screen.
. Then the next screen appears displaying settings such as
SSID, Security and so on.
4, Select "Scan" to search for available wireless
networks at "SSID" option.
, Then the wireless network list appears.
5, Select your wireless network.
O. Set each setting and select "Save" on the next
screen.
Upgrading the VuNow Pod from the Vunow
Server
* If you may receive a message to upgrade the VuNow
Service, we recommend that you upgrade your VuNow
Service immediately.
[]Notes:
. It is recommended that you upgrade to the latest version
to enjoy the new features available. Other reason for
upgrading are to fix known security holes and bugs.
. If you do not get the upgrade message, please go to
"Settings" -> "Product Settings" -> "Product Info" and note
down the product ID, client version and server version. E-
mail the data to the contact details provided at
support@VuNow.com