When seRecting the SPEAKER DISTANCE
1,
Press the CURSOR UP/DOWN buttons to select the "DISTANCE", then press the ENTER button.
* Then "L ~" will be displayed.
2.
Press the CURSOR
UP/DOWN
buttons
to select
the desired
speaker.
mNote
:
o You cannot select the speakers set to "NO".
3.
Press the CURSOR LEFT/RIGHT buttons to set the selected speakers as desired.
. You cannot set the distance within the range of 0.1 ~ 30 feet in 0.1 feet intervals.
4,
Repeat the above steps 2 and 3 until the distances are all set as desired.
mAhout
the speaker distance
When enjoying multi-channel
surround playback with Dolby Digital and DTS sources, etc., it is ideal that the center, surround,
surround back and subwoofer speakers should be the same distance from the main listening position as the front speakers.
By entering the distance between the listening position and each speaker, the delay times of center, surround, surround back
and subwoofer
speakers are automatically
adjusted to create an ideal listening environment
virtually as if the center,
surround, surround back and subwoofer speakers were at their ideal locations respectively.