Product Description
Product Description
Actuator identification
Design Overview
The actuator is a spring or double acting pneumatic actuator.
To determine if you have an Advantage actuator or an Advantage actuator 2.0 locate the spindle
compressor connection and determine if you have a pin or t-slot connection.
Figure 1: Pin connection for Advantage
actuator
Model number
The actuator model number is located on the ITT identification tag. The model number is a four digit
number defining the actuator as follows.
Table 1: Actuator
Code
B
Table 2: Mode of operation
Code
1
2
3
Table 3: Actuator series
Code
03, 04
05, 06
08, 09
15, 16, 17
Table 4: Examples
Model number
B308
B215
1
For fail close actuators, codes are specific spring combinations.
2
Series number equates to diaphragm effective area.
4
1
Figure 2: T-slot Connection for Advantage
actuator 2.0
Description
Advantage actuator 2.0
Description
Fail open (spring to open, air to close) (direct acting)
Fail close (spring to close, air to open) (reverse
acting)
Double acting (air to open, air to close)
2
Actuator series
3
5
8
16
Description
Advantage actuator 2.0, double acting, series 8
Advantage actuator 2.0, fail close, series 16 with a 15
spring set
®
Advantage
Actuator 2.0 Maintenance Manual
Need help?
Do you have a question about the Advantage Actuator 2.0 and is the answer not in the manual?