FAAC 630 Manual page 9

11 AVAILABLE ACCESSORIES
ANTI-VANDAL VALVE (Fig. 20a)
It protects the hydraulic system if the beam is forced.
AUTOMATIC EMERGENCY RELEASE (Fig. 20b)
During a power cut, the automatic emergency release allows
you to manually lift the beam without accessing the release lever
of the hydraulic control unit. A hydraulic system guarantees that
the beam is stopped in opening position.
Fig. 20a
SKIRT KIT
The skirt kit increases visibility of the beam.
It is available in lengths m and m.
IMPORTANT: If a skirt kit is installed, the balancing spring must
be adapted if possible.
ARTICULATION KIT (mod. 630 only)
The articulation kit makes it possible to articulate the rigid beam
to a maximum ceiling height of . m.
IMPORTANT: If the articulated kit is installed, the balancing spring
must be adapted if possible
END FOOT
The end foot allows the beam to rest when closed and thus
prevents the profile bending downward.
IMPORTANT: If a foot is installed, the balancing spring must be
adapted if possible.
Fig. 20b
Fig. 21
.
Fig. 22
FORK SUPPORT
The fork has two functions:
- it prevents the beam, when closed, from bending and splitting
if its end is stressed by extraneous forces.
- it allows the beam to rest when closed and thus prevents the
profile bending downward
To position the fork support foundation plate, refer to fig.
where:
P1 = barrier foundation plate
P2 = fork support foundation plate
L = beam length (in mm)
A = Distance between foundation plates
NB.: Dimensions are in mm.
360
A = L-240
71.5
630+
84
390
9
Fig. 23
Fig. 24
630
90
L
A = L-450
90
L
Fig. 25