10. Sleep Indicator; Timer And Sleep Operation - Sharp XL-MP60 Operation Manual

! Sleep operation
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until "SLEEP" is
displayed and then within 8 seconds, press the MEMORY/
SET button.
To change the sleep time:
While the sleep time is displayed, press the PRESET (
button.
(Maximum: 3 hours - Minimum: 5 minutes)
3:00 2:00
(cancel) 0:05
3
Within 30 seconds, press the MEMORY/SET button.
4
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 30 seconds before the sleep
operation finishes.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button while the sleep timer is set.
The remaining sleep time is displayed for about 8 seconds.
To cancel the sleep operation:
Press the ON/STAND-BY button while the sleep timer is set.
or
1:30 1:00
0:10 0:15 0:30
! To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
1
Set the sleep time (see left, steps 1 - 3).
2
While the sleep timer is set, set the timer playback (steps 4
- 6, pages 25 - 26).
Sleep timer setting Timer playback setting
)
5 minute - 3 hours
Sleep operation will
automatically stop.
XL-MP60
Timer playback
start time
27