Sleep Indicator; Radio - Sharp XL-UR230H Operation Manual

XL-UR230H
XL-UR250H
Timer and sleep operation (Remote Control only) (continued)
XL-UR2110H
ENGLISH
Sleep operation
The radio, compact disc and USB can all be turned off automatically.
1
Play back the desired sound source.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
or
"SLEEP", and
MEMORY button.
4
Press the
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes
5 minutes - 1 minute
5
Press the MEMORY button.
"SLEEP" will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep op-
eration finishes.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
X : XX".
"X : XX" is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
E-35
button to select
press the
or button to select the time.
5-minute intervals
1-minute intervals
or button to select "SLEEP
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Whilst "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
OFF", and press the MEMORY button.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1 Set the sleep time (see left, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback (steps 2 -
10, pages 32 - 33).
Sleep timer setting Timer playback setting
1 minute - 3 hours
Sleep operation will
automatically stop.
or button to select "SLEEP
End time
Desired time
Timer playback start time