Disabling Ports - 3Com Hub 1000 SX User Manual

Table A-2 Port Configuration Menu
Option
(1) Enable port
(2) Disable port
(3) Enable auto-negotiation
(4) Disable auto-negotiation (force link)
(5) Show port settings
(6) Use factory default settings
(7) Save new port settings
(8) Exit without change to settings
(9) Apply changes and exit

Disabling Ports

The following example shows how to disable ports 3, 5, 6, and 7 and
apply the changes.
Enter choice -> 1
Enter port number(s), from 1 to 9: 3 5-7
***************************************************
** Hub 1000 Configuration Menu
***************************************************
[1] Configure port settings
[2] Display hub status
[3] Update firmware image
[4] Change password
[5] Logout
**** Port Configuration Menu
(1) Enable port
(2) Disable port
(3) Enable Auto-Negotiation
(4) Disable Auto-Negotiation (Force link)
Configuring Port Settings
Description
Enable the port for linking. The factory
default is all ports enabled.
Disable the port for linking.
Enable auto-negotiation. The factory
default is auto-negotiation enabled on
all ports.
Disable auto-negotiation.
List the current settings for all ports.
Return selected ports to factory
default settings.
Save the settings. Select this option if you
want settings to persist after a hub reset.
Exit to the Hub 1000 SX Configuration
menu without applying or saving settings.
Apply the settings and exit to the
Hub 1000 SX Configuration menu.
If you want settings to persist after a hub
reset, you must select option 7 before
selecting option 9.
****
A-7
**