Sharp MD-MX20 Operation Manual page 28

(Continued)
To create a track name
1
During playback or in the pause mode, press the
NAME/TOC EDIT button.
2
Within 10 seconds, press the MEMORY/ENTER button.
TRACK
The unit will enter the character input mode.
The track you are listening to will be played repeatedly.
3
Select the character you want using the jog dial.
TRACK
4
Press the MEMORY/ENTER button to enter the char-
acter.
TRACK
Repeat steps 3 to 4 above to enter the characters in the
name.
5
After entering all of the characters in the name, press
the NAME/TOC EDIT button.
The track name will be recorded.
The unit will return to normal playback.
TIMER/DELETE
1,5
2,4
3
To erase a track name:
1
After performing steps 1 to 2.
Press the TIMER/DELETE button for 2 seconds or more.
2
"NAME CLEAR" will flash.
Press the MEMORY/ENTER button.
Notes:
Up to 40 characters can be entered.
This function cannot be used in the random play mode and
APMS play mode.
If you create a track name while recording the track, make
sure you finish entering the name before you finish record-
ing the track.
If the end of the recording is reached before you have en-
tered the complete name, only the characters entered be-
fore the recording ended will be recorded. To rename it,
see page 28.
27