Sharp MD-MX20 Operation Manual page 25

(Continued)
APMS recording from a CD onto a MiniDisc
2
1
Select tracks for APMS playback (page 16).
2
Load a recordable MiniDisc.
3
Press the CD 0 0 0 0 0 MD EDIT (HIGH or NORMAL) button.
APMS playback will start, and recording will start auto-
matically.
Programmed tracks will be recorded in order. After the
unit has finished recording the last track, recording will
stop automatically.
Note:
If repeat play has been set, when you press the CD 0 MD
EDIT (HIGH or NORMAL) button, the repeat mode will be
canceled automatically, and APMS recording will start.
To stop recording:
Press the MD button.
Playback and recording will stop and the track numbers
will be written on the MiniDisc.
MD H
3
1
2
3
To stop recording:
Press the MD
24
To record without using One-Touch Editing
1
2
1
MD H
2
Load a CD and a recordable MiniDisc.
Press the REC button.
The unit will enter the recording stand-by mode.
Press the CD 06 06 button.
06 06 06
button.
Recording will stop and the track numbers will be written
on the MiniDisc.
MD H
3
3