Tannoy CMS 3.0 Series Quick Start Manual page 14

26 CMS 3.0 Series
CMS Series Model Dimensions
CMS 503DC PI BACKCAN
Hole Cut-out Size: 190 mm
153.5
[6.04"]
Ø186.4 Ø256.0
Ø288.0
[11.34"] [7.34"] [10.08"]
8.8 136.2
[0.35"] [5.36"]
CMS 503ICT PI BACKCAN
Hole Cut-out Size: 190 mm
153.5
[6.04"]
Ø256.0
Ø288.0 Ø186.4
[11.34"] [7.34"] [10.08"]
8.8 136.2
[0.35"] [5.36"]
CMS Series Model Dimensions
CMS 403DCe
Hole Cut-out Size: 187 mm
147.6
[5.81"]
34.2
[1.35"]
Ø181.1
Ø205.0
[7.13"]
[8.07"]
CMS 403ICTe
Hole Cut-out Size: 187 mm
147.6
[5.81"]
34.2
[1.35"]
Ø181.1
Ø205.0
[7.13"]
Painting
If desired, the grille and baffle panel may be painted to match the surrounding décor.
Painting the baffle:
• Carefully mask off the driver assembly using the paint mask provided to ensure that the paint does not come into contact with the cone and roll surround.
• Apply several thin coats of paint – this will provide a better fi nish than one overly thick coat.
Painting the grille:
• Carefully remove the acoustically transparent grille cloth from the reverse side of the grille.
• Paint the grille and then replace the grille cloth - several thin coats of paint will provide a better fi nish than one overly thick coat.
• Re-bond the grille cloth to the grille over the entire area using a light spray-adhesive to avoid audible resonances.
Quick Start Guide 27