Using External Units - Sharp MD-MX10H Operation Manual

USING EXTERNAL UNITS

Connecting external units
Before connecting external units, set this unit to the stand-by mode and turn off the power to the external units.
The other MD/CD player
To the output/
headphone socket
To the analogue
output sockets
LEFT
Commercially available RCA lead
Headphones
Notes:
Before plugging in or unplugging the headphones, make sure the volume level is reduced.
Be sure your headphones have a 3.5mm (1/8") diameter plug and are between 16 ohms and 50 ohms impedance.
The recommended impedance is 32 ohms.
When headphones are connected, the speakers are disabled automatically.
Adjust the VOLUME control for the desired volume.
Commercially available lead
with 3.5 mm (1/8") stereo
mini-plug and RCA plugs
RIGHT
RIGHT
RIGHT
32
LEFT
LEFT
Red plug
White plug
To RIGHT
To LEFT