Table of Contents
Advertisement
1.2
On the product
What is possible?
The SCALANCE X005 and SCALANCE X005TS IE switches allow the cost-effective
installation of small Industrial Ethernet linear bus or star structures with switching
functionality. The devices are designed for installation in a cabinet.
Note
It is not possible to use a SCALANCE X005 or SCALANCE X005TS in a redundant ring
because they do not support redundancy.
Note
If devices are supplied over long 24 V power supply lines or networks, measures are
necessary to prevent interference by strong electromagnetic pulses on the supply lines.
These can result, for example, due to lightning or switching of large inductive loads.
One of the tests used to attest the immunity of these devices to electromagnetic interference
is the "surge immunity test" according to EN 61000-4-5. This test requires overvoltage
protection for the power supply lines. A suitable device is, for example, the Dehn Blitzductor
BVT AVD 24 V type no. 918 422 or a comparable protective element.
Manufacturer:
DEHN+SÖHNE GmbH+Co.KG Hans Dehn Str.1 Postfach 1640 D-92306 Neumarkt,
Germany
Components of the product
The following components are supplied with a SCALANCE X005 or SCALANCE X005TS:
● SCALANCE X005 or SCALANCE X005TS IE switch
● 2-terminal plug-in block (power supply)
● Product information
SCALANCE X005 / X005TS
Operating Instructions, 07/2014, C79000-G8976-C344-01
Introduction
1.2 On the product
7
Hide quick links:
Advertisement
Table of Contents
