Makita CL108FD Instruction Manual page 9

Example 4: The securing lip on the prefilter is not firmly
locked in the groove of cleaner housing
3
1
► 1 . Securing lip 2. Prefilter 3. Groove of cleaner
housing
Reassembly for high performance
filter
Connect high performance filter. At this time, make sure
to twist high performance filter so that securing lip is
firmly locked into cleaner unit.
1
► 1 . High performance filter 2. Securing lip
1
► 1 . Securing lip
Install the capsule. Align the mark on the capsule with
the mark near the handle and then firmly twist the cap-
sule in direction of the arrow until it is secured.
2
2
► 1 . Mark
1
► 1 . Capsule 2. Handle 3. Mark
NOTE: Always remove dust ahead of time, as suction
power will be reduced if there is too much dust in
cleaner.
NOTE: Always be sure to check that high perfor-
mance filter is loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into the
motor housing, and cause motor failure.
If the following examples occur, high performance
filter is not loaded correctly. Reload them correctly to
rectify problem.
Problem Examples
Securing lip of high performance filter is not firmly
locked into groove of cleaner housing.
2 1
► 1 . Securing lip 2. Groove of cleaner housing
9 ENGLISH
1
3
2