Product Information & Specifications - Intex Saltwater System CS8111 Owner's Manual

This product is specially designed for above ground pools. It will destroy the
bacteria, oxidize bather organics and control algae, which provide a safe, clean and
comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chlorine.
During the installation of your Saltwater System/Filter Pump, a measured quantity
of salt is dissolved in the pool water to make it slightly salty. The pool water flows
through the saltwater system's electrolytic cell to produce HCLO. The HCLO
dissolves in the water and instantly starts destroying bacteria and algae. It
also oxidizes all other organic materials.
HOW COPPER IONS ARE GENERATED
Low voltage direct current is applied to the copper electrode, and copper ions are
generated and dissolved instantly in the water. Copper is an effective algaecide,
which will prevent algae from growing in the pool.
Power:
Amperage:
Wattage:
Ideal Salt Level:
Maximum Sanitizer Output/hour:
Copper Ionizer Output Current:
Limited Warranty:
Electronic
Control Station
Water Outlet
SAVE THESE INSTRUCTIONS
(133) MODEL CS8111 SALTWATER SYSTEM & FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 11/17/2011
HOW SANITIZER IS GENERATED
PRODUCT SPECIFICATIONS
110 - 120 Volt
Saltwater System - 1.1 A; Filter Pump - 2.4 A
Saltwater System - 125 W; Filter Pump - 275 W
3000 ppm (parts per million)
12 grams/hour
175 mA
see "Limited Warranty"
Electrolytic Cell
English
Flow Sensor
133
Page 10