Product Information & Specifications - Intex Krystal Clear Saltwater System Owner's Manual

This product is specially designed for storable pools (SPs). This product will destroy the
bacteria, oxidize bather organics and control algae, which provides you a clean
and comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chlorine.
During the installation of your Saltwater System/Filter Pump, a measured quantity
of salt is dissolved in the pool water to make it slightly salty. The pool water flows
through the saltwater systemʼs electrolytic cell to produce HOCP. The HOCP
dissolves in the water and instantly starts destroying bacteria and algae. It
also oxidizes all other organic materials.
Low voltage direct current is applied to the copper electrode, and copper ions are
generated and dissolved instantly in the water. Copper is an effective algaecide,
which helps prevent algae from growing in the pool.
Power:
Amperage:
Wattage:
Ideal Salt Level:
Maximum Sanitizer Output/hour:
Copper Ionizer Output Current:
Limited Warranty:
SAVE THESE INSTRUCTIONS
HOW SANITIZER IS GENERATED
HOW COPPER IONS ARE GENERATED
PRODUCT SPECIFICATIONS
110 - 120 Volt
Saltwater System - 1.1 A; Filter Pump - 2.4 A
Saltwater System - 125 W; Filter Pump - 275 W
3000 ppm (parts per million)
9 grams/hour
175 mA
2 Years (see "Limited Warranty")
Page 11