Problems Printing
Cannot configure for USB connection.
Possible Cause
USB cable does not
meet specifications.
Interface is disabled.
Configuration
procedure was not
correctly followed or
cancelled.
USB cable is
disconnected or
faulty.
A USB hub is being
used.
Cannot print.
•
PRNUSBX WRITE ERROR
Possible Cause
Printer is switched OFF.
Printer interface cable is
disconnected.
A converter, buffer,
extension cable or USB
hub is being used.
Printer driver output port
is incorrect.
Printer is not selected in
the printer driver.
Incorrect printer driver is
being used.
Remedy
Use USB cable to specification Ver.1.1.
Check that USB interface is set to Enable.
Configure again from the beginning.
Reconnect or try another cable.
The printer cannot be used with a USB hub. Connect the
printer and computer directly.
is displayed.
Remedy
Switch ON.
Reconnect the printer interface cable.
Test by connecting the printer and computer directly.
Set correct output port to which the printer interface
cable is connected.
Select the printer or set to default printer.
Delete this printer driver and install correct printer driver.
Sharp AR-C200P: Troubleshooting • 142