Table of Contents
Advertisement
Printer takes a long time to start printing.
Possible Cause
The printer has to warm up
returning from power save
mode.
The image drum carries out
a cleaning process to
ensure print quality, which
takes time.
The fuser unit adjusts
temperature, which takes
time.
The printer is processing
data from another
interface.
Toner rubs off when you rub the printed surface.
Possible Cause
Media Weight and Media
Type settings may not be
appropriate.
Packing materials were left
on the fuser when it was
installed.
Remedy
In the printer menu settings, set power save to a
higher value to increase the length of time before
entering power save mode.
Wait until this process has been completed.
Wait until this process has been completed.
Wait until this data is processed.
Remedy
Set the value of media weight to the next heaviest
one.
Careful! Fuser my be HOT!
Open the top cover and check to be sure that all the
packing materials were removed from the fuser. To
remove the fuser see "Changing the Fuser Unit" on
page 164.
Sharp AR-C200P: Troubleshooting • 147
Advertisement
Table of Contents
