Table of Contents
Advertisement
Item
LETTER 0
STYLE
ZERO
CHARACTER
LINE PITCH
WHITE PAGE
SKIP
CR FUNCTION
LF FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
FX Emulation Menu (continued)
The default settings are
Value
DISABLE; ENABLE
NORMAL; SLASHED
6 LPI; 8 LPI
OFF; ON
CR; CR+LF
LF; LF+CR
80 COLUMN; 136 COLUMN
11 inch; 11.7 inch;
12 inch
0.0 to 1.0 inch in 0.01-inch
increments
0.0 to 1.0 inch in 0.01-inch
increments
DISABLE; ENABLE
SAME; DIFF
Sharp AR-C200P: Setting up • 57
bold
.
Description
Specifies the style that
replaces 9B Hex with letter o
and 9D Hex with a zero
Sets the zero to be slashed or
unslashed.
Specifies the line spacing
(lines per inch).
Change this setting to ON if
you do not wish to print blank
pages
Not available for duplex
printing.
Sets functionality on receipt of
CR code.
Sets functionality on receipt of
LF code.
Specifies the number of
columns that will print on a
page (characters per line).
Specifies the length of print
media.
Specifies the distance of print
from the top edge of the paper.
Specifies the distance of print
from the left hand edge of the
paper.
Sets the printing mode that
can fit print data, equivalent to
11 inches (66 lines), in the
LETTER-size printable area.
Sets the height of a character.
SAME: Same height
regardless of CPI.
DIFF: Height varies depending
on CPI.
Advertisement
Table of Contents
