Setting The Number Of Decimal Places - Sharp OZ-5500 Operation Manual

Note that you must move out of a field in which you
have just entered a value before the calculation can
be performed.
Re-calculating using different values
Once you have made a Markup/Margin calculation, you can
recalculate using new values without having to start from
the beginning.
1. Move to whichever field(s) whose values you want to
change, and enter the new values.
NEW
Press to clear the contents of a field
before entering a new value.
2. Move to the field whose new value you want to
calculate, and press
value.
3. Press SOLVE .
The new value is calculated and appears in the field.

Setting the number of decimal places

When using the Cost/Selling price/Markup and Cost/Selling
price/Margin calculator, you can choose whether the
number of decimal places used in calculations is 0 or 2.
In either Cost/Selling price/Markup or Cost/Selling price/
Margin calculator mode:
? to indicate the missing
MENU
1. Press , select DECIMAL POINT SETTINGS
and press ENTER .
2. Select the desired setting and press
The desired number of decimal points is applied.
Note that when no decimal points are used (ie.
DECIMAL POINT : 0 is selected), pressing the
decimal point key will have no effect, but any numbers
entered subsequently will be treated as integers. For
example, typing 12.75 will be treated as 1,275 , which
will produce a very different calculation result.
ENTER .
6
123