Power Source - Sharp MD-MT821 Operation Manual

used with 4 different power sources: a rechargeable battery, an AC
This unit can be
adaptor, a battery case, and a separately available car adaptor (AD-CA20X).
2
To the DC IN 5V jack
Insert securely, all the
way In.
Notes:
After charging has been completed, the
AC adaptor may be left connected.
(For example, when charging at night)
If the rechargeable battery is in the unit,
it will be charged, even while operating
the unit. (Float charge)
n
When the rechargeable battery
the first time or when you want to use it af-
ter a long period of non use, be sure to
charge it fully.
1
2
3
Mark
4
AC 12OV, 60 Hz
To an AC outlet
6
Rechargeable battery power
Open the rechargeable battery compart-
ment cover.
Insert the rechargeable battery.
Close the rechargeable battery compart-
ment cover.
Plug the AC adaptor into the AC outlet,
and then insert the plug on the AC adap-
tor cord into the DC IN 5V jack.
flash, and the battery will begin charg-
ing.
l Battery charging will be complete in
3.0 hours. When the charging
plete, " B " w i l l go out.
Do not force open the rechargeable bat-
tery cover too far.
When the AC adaptor plug is inserted
and a MiniDisc has already been in-
serted, playback may start automatically.
In this case, press the n / :OFF button
twice to turn the power off.
used for
IS
com-
IS