Sharp MD-MT821 Operation Manual page 31

n
To change disc names or track
names
Some MiniDiscs created on other equip-
ment may have more than 100 characters
in a track name or disc name. The charac-
ters from the 101 st character and on can-
not be corrected or changed.
To delete characters:
1
Put the unit in the character input mode.
perform steps 1 - 2 on page 28.
perform steps 1
2
Press the VOL + or VOL - button to
move the cursor to the character you
want to delete.
3
Press the BASS button.
4 Press the EDIT button.
To add characters:
1
Put the unit in the character input mode.
form steps 1 - 2 on page 28.
l
To add characters to a track name,
perform steps 1
2
Press the VOL + or VOL - button to
move the cursor to the right of the char-
acter, where you want to add a new char-
acter.
3
Preform steps 3 - 5 in the "Disc name"
section.
4
Enter the new character you want, and
press the EDIT button.
-
3 on page 29.
-
3 on page 29.
30
n
Name/stamp
Master MiniDisc
(Prerecorded
2. The character
information, such as the
disc name and track
names is transferred
1
Record the sound from the master
MiniDisc onto a recordable MiniDisc.
Playback unit
Master MiniDisc
Refer to the standard recording
method. (Pages 8 - 14)
corded. No character information is
transferred.
tracks on the newly recorded MiniDisc
matches the total number of tracks on
the master MiniDisc. If they do not
match each other, combine or divide
tracks using the edit operation.
(Pages 27 - 28)
l
This function can not be performed
from playback only MiniDiscs.
2
When the recording is complete, remove
the newly recorded MiniDisc and load
the master MiniDisc into the MD-MT821.
Do not mistake the master MiniDisc
for the newly recorded MiniDisc.
MiniDisc
Recording unit
Recordable MiniDisc