Table of Contents
Advertisement
Cleaning the thread guides
a
Clean the thread guide plates for both the upper
thread guide 1 and the middle thread guide 2.
Clean the tension dial
a
1 Turn the dial
counterclockwise.
b
Remove any lint and dust from
the two pieces of felt washers
(top, bottom) inside the tension
dial.
b
1 Clean the thread guide plate.
Note
• When reassembling the tension unit,
be sure not to install the tension disc
upside down.
There is a magnet on the bottom.
Bottom
1 Magnet
Top
45
Advertisement
Table of Contents
