1 Touch pen holder
Use the touch pen holder to hold the touch pen when not in
2 SD card slot
Insert an SD card into the SD card slot in order to import/export
embroidery pattern data.
3 USB port for media
In order to send patterns from/to USB media, plug the USB
media directly into the USB port.
4 USB port for computer
In order to import/export patterns between a computer and the
machine, plug the USB cable into the USB port.
5 Main power switch
Use the main power switch to turn the machine ON (I) and OFF
Do not turn the power on soon after turning the power off. It is
recommended that you wait 5 seconds before turning the
power back on.
6 Power supply plug
Insert the plug on the power supply cord into the power supply
7 Ventilation slots
Rotate the handwheel to move the needle up and down. Be
sure to rotate the handwheel toward the LCD panel
1 Start/Stop button
2 Thread trimming button
3 Automatic needle-threading button
5 LCD (touch panel)
Press the start/stop button to start or stop the machine. The
lighting status and color of the button changes depending on
the operation condition of the machine.
Lit in red
: When the machine cannot start
Flashing in green
: When the machine can start
Lit in green
: While the machine is sewing
Flashing in orange
: When the machine can cut the
: When the machine is turned off
Press the thread trimming button to trim both the upper and
the bobbin threads.
Press the automatic needle threading button to thread the
Touch the keys that appear on the touch panel to select and
edit patterns and confirm various information.