Download  Print this page

Needle Precautions; Checking The Needle - Brother 884-T20 Operation Manual

Hide thumbs


Needle precautions

Be sure to observe the following precautions concerning the correct choice of needle for your machine.
• Your machine is designed to use household embroidery needles. The factory recommended needle is "HAX
130 EBBR" (Organ). Schmetz needles 130/705 H-E may be used as a substitute. Use of any other needles
may break the needle or thread or damage the needle-threading mechanism or result in injuries.
• Never use bent needles. Bent needles can easily break, possibly resulting in injuries.

Checking the needle

Sewing with a bent needle is extremely dangerous since the needle may break while the machine is
Place the flat side of the needle on a flat surface and check that the distance between the needle and the
flat surface is even. If the needle is bent or the tip of the needle is broken, replace the needle with a new
one. (Refer to "Changing the needle" on page 40.)
1 Flat side
2 Needle type marking
■ Good needle
3 Flat surface
■ Bad needle
If the distance between the needle
and the flat surface is not even, the
needle is bent. Do not use a bent


Table of Contents

   Also See for Brother 884-T20

   Related Manuals for Brother 884-T20

Comments to this Manuals

Symbols: 0
Latest comments: