Screen In Standby Status; Status Bar - INIM Electronics PREVIDIA MAX Manual

User's manual
3.2

Screen in standby status

Buttons to access the
events logs, system
[A]
status and
programming.
Status bar (always
present) shows
[B]
essential information
regarding the system.
Customizable area
(customizable during
the programming
phase) for images
[C]
relating to the status
of the system
elements or
customized function
buttons .
3.3

Status Bar

Icon
Day/Night
status
Mains network
User interface
B
Selection of this area will allow you to enter a code and change the current user-
- 1 = Public level (no code entry)
- 2 = Supervision level (turn key or code entry)
- 3 = Programming level (installer code entry)
- The control panel runs the early warning phase before activating an alarm
triggered by a detector
- the sensitivity of the detectors is set in day mode
- early warnings are not run
- the sensitivity of the detectors is set in night mode
- in the event of an alarm, if the sounders are silenced they will reactivate
automatically after a set time.
Mains power-supply functioning properly
Indicates that at least one power-supply module has detected mains failure.
C
Function
access level.
Day Mode:
Night Mode:
A
11