INIM Electronics PREVIDIA MAX Manual page 10

Status LED
Disabled
Test
Function LEDs
Signalling
test
Evacuate
Investigate
Silence
buzzer
Silence
sounder
Reset
Multiple
alarms
10
Colou
On solid
r
One or more of the system
Yellow
elements has been disabled.
One or more of the system
Yellow
elements has been put in test mode.
Colou
On solid
r
The test on the visual
Yellow
signalling devices is running.
The evacuation phase has
Red
been activated manually.
The investigation time has
Yellow
been activated.
The buzzer has been
Yellow
silenced.
The sounders have been
Yellow
silenced.
The reset function is
disabled. The sounders
Yellow must be silenced before the
Reset function can be re-
enabled.
More than one alarm is
Red
active on the system.
Fire detection and extinguishant system
Flashing
Function button
If this button is pressed and held all the LEDs
on the control panel will light.
Button for manual activation of the signalling
devices (audible and visual) for evacuation of
the premises.
Button to request supplementary investigation
time and thus lengthen the early-warning
period.
This button silences the control panel buzzer.
Events which occur after silencing will
reactivate the buzzer.
During alarm status, this button can be used
to stop the audible and visual signalling
devices.
Pressing this button again will reactivate the
silenced audible and visual signalling devices.
Button for the annulment of active events and
the reset of standby conditions.
This button allows you to scroll through the
active alarm events on the screen.
User interface