Spectrum 55241 Assembly Instructions

Assembly Instructions
Important
Before you begin, please make sure all parts and proper quantities
are included. Any parts damaged during shipment must be reported
within 15 days of receipt. To report information regarding damage, to
purchase parts or accessories, or if you have any questions, please
contact us at:
www.spectrumfurniture.com
715-723-6750, 800-235-1262
Thank you for purchasing Spectrum products!

Media Manager / Director installation

1. Remove the JC bolts from the audience side of the lectern with a 4mm hex wrench.
2. Remove the existing metal panel. This will no longer be needed.
3. Align and attach the new logo panel to the lectern with the removed JC bolts. Figure 1.
M e
(1) 025039
4mm hex wrench
V 2
e r
n a g
l
M a
a n e
d i a
o p
l o g
JC bolts
(6 required)
55241 - Media Manager V2
55252 - Masters
M e
d i a
l o g
o p
JC bolts
(4 required)
Figure 1
Media Manager V2
Logo Panel
Media Director V2
Logo Panel
Masters Logo Panel
Doctorate Logo Panel
Logo Panel
55261 - Media Director V2
55248 - Doctorate
D i r
e c t
o r
a n e
V 2
l
0107055R1 Page 1 of 2
4mm hex
wrench
(included)