KMC Controls FlexStat Quick Reference Manual page 2

Heat/Cool, Fan, Occupancy, and Override
When the fan is commanded to run, the animated
FAN icon on the display rotates (if programmed to).
When the fan command stops, the fan icon is mo-
tionless.
The OCC icon shows a sun when in Occupied mode
and a quarter moon when in Unoccupied mode.
HEAT or COOL will show (and be animated when
there is an active command to move the room tem-
perature toward the setpoint via mechanical heating/
cooling or an economizer), depending on the current
mode. This can also be turned OFF.
To override these modes from the Home (tempera-
ture display) screen, press the Left arrow button.
Press Up or Down to get to the desired line and then
Enter (twice) to edit the mode setting. Press Left to
exit to Home.
Main Menu and Settings
From the Home (temperature display) screen, press
the Right arrow button to enter the Main Menu.
NOTE: Settings and adjustments may require a
password.
Schedules
SCHEDULE
ENTIRE WEEK [MON–SUN]
WEEKDAYS [MON–FRI]
WEEKEND [SAT–SUN]
INDIVIDUAL DAYS
HOLIDAYS
The factory default schedule is always occupied
(ON). To modify the schedule for mixed occupied
(ON) and unoccupied (OFF) times, select Schedules
in the Main Menu and press:
1. Right/Left to move among days and Enter to
select.
2. Up/Down to move among entries and Enter to
select and edit.
3. Right/Left to move among value fields.
4. Up/Down to increment/decrement value.
© 2014 KMC Controls, Inc.
FlexStat
ENTIRE WEEK
1:
7:30:00 AM ON
2: 5:15:00 PM OFF
3:
4:
5:
6:
[—>] DELETES ENTRY
(Specifications, design, and operation are subject to change without notice)
5. Enter to exit value editing.
6. Left to move back to days or back one page.
NOTE: If a day of a week (e.g., Friday) has a
different schedule than the rest, using the
Weekdays menu first and then modifying
that one day in the Individual Days menu
may be easier (two entries) than entering
schedules for each day separately in the
Individual Days menu (five entries).
NOTE: The last overlapping entry overrides
any other. For example, suppose the
WEEKDAYS menu is used to set all
weekdays for 7:00 AM ON and 5:00 PM
OFF, and then the INDIVIDUAL DAYS
menu is used to add some additional
evening meeting ON times for Tuesday
and Wednesday. If the WEEKDAYS menu
is later used to change the ON time from
7:00 to 7:15, schedules for all the individual
week days will be reset to conform to
what appears in the WEEKDAYS menu
and any special times for individual days
will be erased. (Special day schedules will
then need to be added again through the
INDIVIDUAL DAYS menu).
The Holiday entries will override the normal
occupied weekly schedule entries and keep those
days' settings at their setback values. (Setback values
are entered in the Setpoints section of the Main
Menu.)
HOL1: JAN 1 2009
HOL2: MAR 21 2009
HOL3: MAY 26 2009
HOL4: JULY 4 2009
HOL5: SEPT 1 2009
HOL6: NOV 27 2009
HOL7: NOV 28 2009
NOTE: See the FlexStat Operation Guide
operation details.
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
www.kmccontrols.com
info@kmccontrols.com
2
HOLIDAYS
574.831.5250
Quick Reference Guide
for more
913-019-06C