DCI Edge ORTHODONTIC CHAIR Installation Instructions Manual page 10

ORTHODONTIC CHAIR
Installation Instructions
INSTALLATION
HEIGHT ADJUSTMENT
Adjust height by removing or adding 2 spacers between the post and the upper seat assembly.
Access 2 bolts from
above as shown
here using a 9/16"
socket drive.
Remove the upper chair assembly from the post and remove or add spacers to the desired height.
4 set screws
(PN 59251)
10
Disconnect 2 cable
harnesses here.
Access 2 bolts from below as shown here
using a 3/16" hex key.
10