Schlage 390G+ Installation Instructions

INSTALLATION CONSIDERATIONS:

The 390G+ is an electromagnetic lock designed for use on exterior gate applications, though it can be used indoors under circumstances where conduit-enclosed wiring is
desirable or unavoidable. These instructions cover two basic mounting situations: swinging and sliding. Other mounting situations may be encountered which may necessi-
tate fabrication of custom brackets or reinforcements to accommodate the lock. Wiring should be protected by conduit. Wire leads provided are 24 inches long and provi-
sions should be made for connections within that distance. You must determine which type of mounting screws provided will best suit your installation. For light-gauge metal
frames, self tapping screws may be used. If the frame is heavy gauge metal, machine screws may be required to adapt the lock to a particular post or frame. Armature
mounting hardware is provided for direct mounting. The sex nut (provided) can be used instead of the TJ brackets, if mounting the armature on a standard, 1-3/4" door.
Other sex nuts, of different lengths, are available from Locknetics distributors. Refer to the last page for parts list with pictures.
SLIDING GATE APPLICATION TEMPLATE:
Schlage Lock Company
575 Birch Street
Forestville, CT 06010
technical support: 866-322-1237
email: SESsupport@irco.com
web: www.irsupport.net
FORM 39080 REV. E
390G+ INSTALLATION
INSTRUCTIONS
SWINGING GATE APPLICATION TEMPLATE:
1 1/2010